VT20 BT20 Titanium Alloy for Aerospace and High-Temperature Structures
Updated : Nov. 2, 2026VT20 / BT20 Titanium Alloy for Aerospace & High-Temperature Structures
VT20 (Russian designation ВТ20, also commonly written as BT20 in international sourcing) is a near-alpha Ti-Al-Zr-Mo-V titanium alloy. Its corresponding Chinese grade is TA15. The alloy combines high room-temperature strength, elevated-temperature strength retention, and weldability, and is mainly used for aerospace load-bearing structures, welded structures, and components operating at temperatures around 500°C.
For VT20 / BT20 projects, Chalco Titanium can evaluate and match a supply solution based on customer drawings, specified GOST standards, product form, dimensions, and inspection requirements.
VT20 / BT20 Available Product Forms
-
VT20 / BT20 Titanium Sheet
Suitable for thin-wall aerospace formed parts, welded panels, and other structures requiring thinner sections.
-
VT20 / BT20 Titanium Plate
Suitable for machined load-bearing parts, frames and beams, thicker aerospace structures, and blanks for downstream manufacturing.
-
VT20 / BT20 Titanium Bar
Mainly used for machined parts, forging stock, and downstream manufacture of high-load structural components.
-
VT20 Forging / Forged Blank
Suitable for high-load frames, rings, integral structural parts, and blanks for subsequent finish machining.
For VT20 welded structures, VT20-1sv / VT20-2sv Welding Wire can also be evaluated. These filler wires have their own chemical compositions and GOST requirements, so they are not grouped with VT20 base metal in the same product card.
VT20 / BT20 Titanium Chemical Composition
VT20 uses a Ti-Al-Zr-Mo-V near-alpha alloy system. Its value is not simply high strength, but a balance of strength, elevated-temperature stability, and manufacturability for aerospace structures, providing a foundation for subsequent forming, welding, and load-bearing service at elevated temperatures.
| Element | Content, wt.% |
| Al | 5.5–7.0 |
| Zr | 1.5–2.5 |
| Mo | 0.5–2.0 |
| V | 0.8–2.5 |
| Fe | ≤0.25 |
| Si | ≤0.15 |
| O | ≤0.15 |
| N | ≤0.05 |
| C | ≤0.10 |
| H | ≤0.015 |
| Ti | Balance |
The relatively high Al content provides strengthening and thermal stability, while Zr, Mo, and V help balance elevated-temperature performance and processability. For projects already specifying VT20 / BT20, chemical composition is also the first basis for confirming whether the material falls within the VT20 alloy window. Composition ranges are referenced to GOST 19807-91.
VT20 / BT20 Mechanical Properties
VT20 offers room-temperature tensile strength generally in the 900–1100 MPa range across Sheet, Plate, and Bar product forms, making it suitable for applications ranging from thin-wall welded structures to thicker load-bearing parts and stock for subsequent machining or forging.
| Product Form | Size / Condition | Tensile Strength Rm | Elongation A | Reduction Z |
| Sheet | 0.8–1.8 mm, annealed | ≥930 MPa | ≥12% | — |
| Sheet | >1.8–4.0 mm, annealed | ≥930 MPa | ≥10% | — |
| Sheet | >4.0–10.5 mm, annealed | ≥930 MPa | ≥8% | — |
| Plate | 11–60 mm, hot rolled | 930–1130 MPa | ≥6% | ≥12% |
| Plate | >60–100 mm, hot rolled | 880–1130 MPa | ≥5% | ≥10% |
| Bar* | Ø10–100 mm | 930–1130 MPa | ≥10% | ≥25% |
| Bar* | >Ø100–150 mm | 885–1130 MPa | ≥8% | ≥20% |
* Bar values correspond to annealed test specimens specified by the standard and should not be treated as equivalent to the as-delivered condition of hot-rolled bar.
This distinction matters in procurement: VT20 does not have one fixed "material strength" value. As thickness and diameter increase, property requirements and ductility limits change. We therefore match the product condition and property requirements to whether the customer needs thin sheet for forming, plate for machining, or bar/forging stock.
Why VT20 Is Suitable for Service Around 500°C
One of VT20's defining advantages is that it not only provides high strength at room temperature, but also retains useful load-bearing capability as the temperature rises to around 500°C. This makes it particularly suitable for aerospace structures that require both weight reduction and high strength while operating in medium- to high-temperature environments.
| Temperature (VT20 Forging Research) | Typical / Research-Based Tensile Strength |
| Room Temperature | Approx. 980–1110 MPa |
| 500°C | Approx. 675–750 MPa |
In research on VT20 forgings under different heat-treatment conditions, tensile strength at 500°C remained approximately 675–750 MPa, or about two-thirds of the corresponding room-temperature level. This combination of "high room-temperature strength + elevated-temperature strength retention" is better suited to aerospace load-bearing frames, rings, welded stiffened structures, and components operating near heat sources. These values are research examples and should not be treated as guaranteed values for all VT20 products.
Research source: VIAM (All-Russian Scientific Research Institute of Aviation Materials) — Research on heat treatment and elevated-temperature properties of VT20 forgings: View original research PDF
VT20 / BT20 Processing & Welding
VT20 can be supplied as Sheet, Plate, Bar, and Forging for downstream forming, machining, forging, and welding routes. Sheet is better suited to thin-wall forming and welded structures, while Plate, Bar, and Forging are used more often for load-bearing parts and subsequent processing. The delivery condition should be confirmed against the final manufacturing route and property requirements.
Research evidence: E.O. Paton Electric Welding Institute of the National Academy of Sciences of Ukraine reported that VT20 has been used in thin-wall welded aerospace structures such as stiffened panels, with systematic studies covering electron-beam welding, automatic argon-arc welding, residual stress, and cyclic-load life.
Typical Aerospace Applications of VT20 / BT20
VT20 is better suited to aerospace structures that require weight reduction, high load-bearing capability, and medium- to high-temperature service performance, rather than being positioned as a general-purpose titanium alloy for all industrial applications.
Aircraft Frames, Beams & Load-Bearing Components
Typical Product Forms: Plate / ForgingThe combination of high strength and low density makes VT20 suitable for aircraft frames, beams, stiffeners, and other load-bearing structures where weight reduction is important.
Welded Stringers & Stiffened Panels
Typical Product Form: SheetVT20 combines thin-wall forming with welded fabrication for structures such as fuselage stiffened panels. Paton's VT20 stiffened-panel research provides direct engineering evidence for this application.
High-Temperature Rings & Load-Bearing Structural Parts
Typical Product Forms: Plate / Bar / ForgingFor rings and load-bearing structures operating near heat sources, VT20 offers not only high room-temperature strength but also useful strength retention around 500°C.
From thin-wall welded structures to thick-section load-bearing parts, VT20's competitiveness does not come from one isolated property, but from its ability to combine high strength, elevated-temperature load-bearing capability, and multiple aerospace manufacturing routes within one alloy system.
Applicable Standards for VT20 / BT20
Procurement of VT20 / BT20 involves more than confirming the alloy grade. For VT20, Sheet, Plate, Bar, and Welding Wire are governed by different product standards, with different dimensional, delivery-condition, and mechanical-property requirements.
For projects whose drawings already specify VT20 / ВТ20, a more effective purchasing approach is to define grade + product form + applicable standard + condition + inspection requirements together.
Grade & Chemical Composition: GOST 19807-91
Titanium Sheet: GOST 22178-76Titanium Plate: GOST 23755-79
Hot-Rolled Bar: GOST 26492-85
Titanium Forging: Confirm according to customer drawings, specified OST / TU, or project technical specifications
Welding Filler Wire: GOST 27265-87
Rosstandart, the Federal Agency on Technical Regulating and Metrology of Russia, continues to maintain the GOST standards listed above. GOST 22178-76 and GOST 23755-79 had amendments or corrigenda recorded in 2024. Formal orders should follow the version specified by the customer and the latest valid text.
Why Choose Chalco Titanium for VT20 / BT20?
Chalco Titanium can evaluate VT20 / BT20 material supply solutions against project requirements, from specification review through delivery, with the aim of reducing mismatches among grade, dimensions, condition, and final acceptance requirements.
Multiple Product Forms: Sheet, Plate, Bar, and Forging supply options can be evaluated according to project needs, helping customers select raw material forms that match downstream forming, machining, or forging routes.
Drawing & Specification Review: For projects that already specify VT20 / ВТ20, GOST requirements, or specific properties, supply can be reviewed against drawings, dimensions, delivery condition, and inspection criteria rather than quoted by grade alone.
Inspection & Traceability: Dimensions, surface condition, mechanical properties, and required inspection items can be confirmed according to the order. Batch information, material certificates, and inspection reports can support traceability. If NDT is required, the specific method and acceptance criteria can be confirmed before quotation.
Custom Project Support: For non-standard dimensions, Forged Blanks, or special acceptance requirements, drawings and technical conditions can be reviewed first, followed by confirmation of the manufacturing route, inspection items, and quotation conditions.
If you already have a VT20 / BT20 drawing or purchasing specification, you can provide product form, dimensions, applicable standard, quantity, and inspection requirements so that a suitable supply solution can be evaluated.
FAQ
Can VT20 / BT20 be supplied to a customer drawing?
The project can be evaluated against customer requirements. Please provide the product form, dimensions, applicable standard, and drawing requirements so that we can confirm a suitable Sheet, Plate, Bar, or Forging supply solution.
Can you supply custom VT20 sizes or forged blanks?
Non-standard VT20 sizes and Forged Blanks can be evaluated by project. For forging projects, we recommend providing the drawing, unit weight, heat-treatment requirements, and inspection requirements.
Is TA15 the Chinese equivalent of VT20 / BT20?
TA15 is the corresponding Chinese grade for VT20 / BT20, with a highly similar principal alloy system and composition range. If an order explicitly specifies GOST VT20, compliance should still be confirmed against the actual standard and acceptance requirements.
What information is needed for a VT20 / BT20 quote?
We recommend providing Grade / Standard, Product Form, Dimensions, Quantity, Condition, and Inspection Requirements. If a drawing is available, you can send it directly for quotation.
Send Your VT20 / BT20 Requirement
Already have a VT20 / BT20 / ВТ20 drawing or purchasing specification? Send the product form, dimensions, standard, and quantity, and Chalco Titanium can further confirm the material, supply condition, and inspection requirements.


